Signal Sink Category Block Listing

The following blocks are included in the Signal Sink category :

• File Write
• Final Value

File Write

This block writes data to an external file in either ASCII or binary format. Writing of the data is controlled via an external clock. A clock value greater than 0.5 is considered high. The block can be configured to have from one to eight data inputs.

Final Value

This block writes the final value of an input (value on last executed simulation step) to an external file in ASCII format. The block can be configured to have from one to eight data inputs.

This block can be used to record BER curve results or other data generated across multiple runs. To activate multiple iterations, select “Auto Restart” in the Simulation Properties dialog box.